Precision 10‑Ton Hydraulic Cold Drawing Machine – Compact Power for Small‑Diameter Tubes & Bars

Ideal for medical hypotubes, precision instrument shafts, fuel injection lines, and electronics components – delivering ±0.015 mm accuracy in a space‑saving, energy‑efficient design.

Why a 10‑Ton Precision Hydraulic Drawbench?

Not every application requires hundreds of tons. For manufacturers producing small‑diameter tubes and bars (2–25 mm), a 10‑ton precision hydraulic cold drawing machine offers the perfect balance of power, accuracy, and economy. Its smooth hydraulic force and closed‑loop control deliver the same micron‑level precision as larger machines – but in a compact footprint with lower energy consumption.

Key Technical Specifications

Parameter	Value
Drawing force	10 tons (100 kN)
Tube OD range	2 – 25 mm
Bar diameter range	2 – 20 mm
Wall thickness (tube)	0.3 – 4 mm
Drawing length	Up to 6 m (12 m optional)
Drawing speed	0 – 20 m/min (programmable)
Dimensional accuracy	±0.015 mm (typical)
Surface finish	Ra ≤0.3 µm

Why Hydraulic for 10‑Ton Applications?

Feature	Benefit
Smooth, vibration‑free force	No chatter marks – critical for medical and electronic components
Infinitely variable speed	Optimize drawing velocity for each material (stainless, copper, aluminum, titanium)
Built‑in overload protection	Prevents die and tooling damage
Energy efficiency	Variable‑displacement pump draws power only during the draw cycle
Quiet operation	Ideal for cleanroom or laboratory environments

Core Technologies for Precision Drawing

• Rigid, stress‑relieved frame – Ensures perfect axial alignment for ±0.015 mm tolerance.

• Closed‑loop force & position control – Real‑time adjustment maintains consistent dimensions even with material variations.

• Polished carbide / DLC‑coated dies – Prevents galling on stainless steel, copper, and aluminum.

• Quick‑change die holder – Switch sizes in under 5 minutes.

• In‑process laser measurement (optional) – Real‑time OD verification with data logging.

Materials You Can Draw

• Stainless steel – 304, 316, 17‑4 PH, 420 (hypotubes, guidewires)

• Copper & brass – C11000, C12200, C36000 (electrical connectors, plumbing components)

• Aluminum – 6061, 7075, 3003 (small‑diameter cooling tubes, precision shafts)

• Titanium – Grade 2, Grade 5 (medical implants, aerospace components)

• Carbon steel – 1010, 1020, 1045 (fuel injection lines, small shafts)

Applications & Industries

Industry	Typical Products	Why 10 Tons is Enough
Medical	Hypotubes (2–6 mm OD), guidewire blanks, surgical cannulas	Low drawing force; ultra‑precision required
Automotive	Fuel injection lines (6–10 mm OD), sensor tubes	Moderate reduction; high volume
Electronics	Heat pipe sleeves, connector pins, battery terminals	Small diameters; surface finish critical
Aerospace	Instrument tubing, small‑diameter hydraulic lines	High‑strength alloys; tight tolerances
General engineering	Precision bar stock for Swiss lathes, bushing blanks	Consistent diameter, good straightness

Space & Energy Savings

Comparison	10‑Ton Hydraulic Drawbench
Floor space	∼8 m² (machine only)
Power requirement	∼7.5 kW (vs. 22 kW for 30‑ton machine)
Typical output	500–1,500 kg/shift (material‑dependent)

How the 10‑Ton Hydraulic Drawbench Works

1. Automatic pointing (optional) – Rotary swager or hydraulic pointer reduces the tube/bar end.

2. Loading – Bar/tube is fed into the die area (manual or automatic magazine).

3. Drawing – Hydraulic cylinder pulls the carriage; closed‑loop control maintains force and speed.

4. Unloading – Drawn product is discharged to a straightener or collection rack.

5. Data recording – Drawing force, speed, and dimensions are logged for traceability.

Automation Options

• Magazine infeed – Holds up to 500 kg of bars/tubes; auto‑singulation.

• In‑line straightener – Multi‑roll or two‑roll for post‑draw geometric correction.

• Cut‑to‑length saw – Precision cutting with ±0.5 mm accuracy.

• Touchscreen HMI – Recipe storage for hundreds of materials and sizes.

Real‑World Example

A manufacturer of medical hypotubes (316 L stainless, 3 mm OD × 0.3 mm wall) needed ±0.015 mm dimensional accuracy and Ra 0.2 µm surface finish. A larger drawbench was overkill and risked vibration marks. After installing a FangRong 10‑ton precision hydraulic drawbench, they achieved:

• OD tolerance: ±0.008 mm (well below spec)

• Surface finish: Ra 0.15 µm

• Scrap rate: <0.3%

• Energy cost: 65% lower than their previous machine

Why Choose FangRong for Your 10‑Ton Precision Drawbench?

• 26 years of cold drawing experience – Thousands of small‑drawbench installations worldwide.

• Custom engineering – Tailored to your diameter range, materials, and production volume.

• CE certified – Full safety compliance.

• Global service network – Installation, training, remote diagnostics, and spare parts.

Conclusion

For manufacturers of small‑diameter tubes and bars – from medical hypotubes to fuel injection lines – the precision 10‑ton hydraulic cold drawing machine delivers the accuracy, surface quality, and efficiency required for high‑value components. Its compact size, smooth hydraulic force, and closed‑loop control make it the ideal choice for precision drawing of stainless steel, copper, aluminum, titanium, and specialty alloys.

Ready to downsize to precision? Contact FangRong with your target dimensions and materials for a custom proposal.

Know More About Us FangRong Metallurgical Equipment Manufacturer in China since 1998. Professional in Metal Straightening machine, Cold Drawing machine, Push Pointer Drawing Machine, Automatic Three Lines Drawing Machine, Thread rolling machine, Tube-end shrinking machine, Pointing Machine, Core pipe machine, Polishing Machine etc.

Follow US:

Email: frsale@dgfangrong.com frmachine001@dgfangrong.com

Whatsapp/Skype/Wechat:+8618928290716 +8613537360900

Web: https://www.fangrong-machines.com        https://www.dgfangrong.com

Keywords: 10‑ton cold drawing machine, precision hydraulic drawbench, small tube drawing, miniature bar drawing, medical hypotube drawbench, fuel injection line drawing, ±0.015mm accuracy, compact cold drawbench.